Please find below our general specification to assist you in your choice of partitioning.

CONSTRUCTION
Overall nominal thickness 32 mm (at head).

All exposed framework is polyester powder coated as standard to a range of RAL colours. Headtrack is an extruded aluminium profile 32mm x 32mm that can accept glazing wedge gaskets for both 10 and 12mm glass. The same section is also used as a Wall Abutment. The Floortrack or Base Channel consists of two L- shaped extruded aluminium profiles 25mm x 25mm that are fixed to the floor with the vertical elements facing each other. Doorframes are not usually required as full Glass Doors , that complete the glazed run, are able to be fixed using pivot hinges at the head and floor to provide an open atmosphere to the building environment. Alternatively, sliding full glass doors can provide a sophisticated entrance. The Panel Joints can be either the traditional silicon or clear neoprene gasket or ‘dry joint’ which allows quicker installation and relocation.

The system cannot be fire-rated due to its use of plastics and aluminium. Glazing thickness can be either 10mm or 12mm , which is dependant on the ceiling height.